In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks that you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it’s actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.

Then you will have http://techmontaj.mn/?p=7981 to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can make certain that nothing will leak once you place the mask on. Make sure the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you’re done, so that you don’t wind up with smudges or smears on your dog.

Then it is time to paste the mask onto your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Be certain it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the surface of your dog. Don’t make the folds too large or else it might look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Make certain the ears are level and make sure that it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask as your dog protection, you’ll need to do some sanding to be sure that it’s safe on your dog. You can do this by sanding off any excess paper which might have been eliminated from your mask.